Mechanical Unit Maintenance Manual
This new publication contains proprietary information of FANUC America Corporation furnished f or customer use only. No other uses are authorized without the express written permission of FANUC America Corporation. The descriptions and specifications contained in this manual were in effect at the time this manual was approved for printing. FANUC Amer ica Corporation, hereinafter referred to as FANUC, reserves the right to discontinue models at any time or to change specifications or design without notice and without incurring obligations. FANUC manuals present descriptions, specifications, drawings, schematics, bills of mate rial, parts, c onnections and/or procedur es for install ing, disassembling, connecting, operating and programming FANUC products and/or systems. Such systems consist of r obots, extended axes, robot cont rollers, application software, the KAREL® programming language, INSIGHT® vision equipment, and special tools.
FANUC recommends that only persons who have been trained in one or more approved FANUC Training Course(s) be permitted to install, operate, use, perform procedures on, repair, and/or maintain FAN UC products and/ or systems and their respective com ponents. Approved training neces sitates that the courses selected be relevant to the type of system installed and application performed at the customer site. WARNING This equipment generates, uses, and can radiate radiofrequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. As temporarily permitted by regulation, it has not been tested for compliance with the limits for Class A computing devices pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference. Operation of the equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measure may be required to correct the interference.
FANUC conducts courses on its systems and products on a regularly scheduled basis at the com pany's world headquar ters in Rochest er Hills, Michigan. For additional information contact FANUC America Corporation Training Department 3900 W.
Hamlin Road Rochester Hills, Michigan For customer assistance, including Technical Support, Service, Parts & Part Repair, and Marketing Requests, contact the Customer Resource Center, 24 hours a day, at 1-800-47-ROB OT (1-800-477-6268). International custom ers should call 011-1-248-377-7159. Send your comments and suggestions about this manual to.
Field repair of aircraft engine (1915-1916) The technical meaning of maintenance involves functional checks, servicing, repairing or replacing of necessary devices, equipment, machinery, building infrastructure, and supporting utilities in industrial, business, governmental, and residential installations. Over time, this has come to often include both and maintenance as cost-effective practices to keep equipment ready for operation at the stage of a. The marine transportation, offshore structures, industrial plant and industries depend on maintenance, repair and overhaul (MRO) including scheduled or preventive maintenance programmes to maintain and restore applied to steel in environments subject to attack from erosion, corrosion and environmental pollution. Road repair Over time, the terminology of maintenance and MRO has begun to become standardized. The United States Department of Defense uses the following definitions:. Any activity—such as tests, measurements, replacements, adjustments, and repairs—intended to retain or restore a in or to a specified state in which the unit can perform its required functions.
This manual provides information on installation, preventive maintenance, trouble. A mechanical unit can be activated or deactivated to make it safe when, for. LR MATE 200id Mechanical unit manual - B-83495EN/01. 293790632 FANUC ROBOT SERIES R30iB and Mate Controller Maintenance Manual. FANUC Robot LR Mate 200iD.
All action taken to retain material in a serviceable condition or to restore it to serviceability. It includes inspections, testing, servicing, classification as to serviceability, repair, and reclamation. All supply and repair action taken to keep a force in condition to carry out its mission. The routine recurring work required to keep a facility (, building, structure, facility, utility, or other real property) in such condition that it may be continuously used, at its original or designed capacity and efficiency for its intended purpose.
Maintenance is strictly connected to the utilization stage of the product or technical system, in which the concept of maintainability must be included. In this scenario, maintainability is considered as the ability of an item, under stated conditions of use, to be retained in or restored to a state in which it can perform its required functions, using prescribed procedures and resources. In some domains like, terms maintenance, repair and overhaul also include inspection, rebuilding, alteration and the supply of spare parts, accessories, raw materials, adhesives, sealants, coatings and for aircraft maintenance at the stage. In international civil aviation maintenance means:. The performance of tasks required to ensure the continuing airworthiness of an aircraft, including any one or combination of overhaul, inspection, replacement, defect rectification, and the embodiment of a modification or a repair. This definition covers all activities for which require issuance of a maintenance release document (aircraft certificate of return to service - CRS). Types The basic types of maintenance falling under MRO include:.
Mechanical Maintenance Jobs
or maintenance, where equipment or facilities are inspected, maintained and protected before break down or other problems occur. maintenance where equipment is repaired or replaced after wear, malfunction or break down. Predictive maintenance, which uses sensor data to monitor a system, then continuously evaluates it against historical trends to predict failure before it occurs. Employs MRO to preserve, rehabilitate, restore, or reconstruct historical structures with stone, brick, glass, metal, and wood which match the original constituent materials where possible, or with suitable polymer technologies when not. Preventive. C-130J Hercules preventive cleaning at Keesler Air Force Base, Mississippi after a period of operation over the Gulf of Mexico (salt and moisture which lead to active corrosion require regular cleaning) Preventive maintenance is maintenance performed with the intent of avoiding failures, safety violations, unnecessary production costs and losses, and to conserve original materials of fabrication.
The effectiveness of a preventive maintenance schedule depends on the which it was based on, and the ground rules used for cost efficacy. Corrective. Main article: Corrective maintenance is a type of maintenance used for equipment after equipment break down or malfunction is often most expensive – not only can worn equipment damage other parts and cause multiple damage, but consequential repair and replacement costs and loss of revenues due to down time during overhaul can be significant. Rebuilding and resurfacing of equipment and infrastructure damaged by erosion and corrosion as part of corrective or preventive maintenance programmes involves conventional processes such as welding and metal flame spraying, as well as engineered solutions with materials. Predictive.
Main article: More recently, advances in sensing and computing technology have given rise to predictive maintenance. This maintenance strategy uses sensors to monitor key parameters within a machine or system, and uses this data in conjunction with analysed historical trends to continuously evaluate the system health and predict a breakdown before it happens. This strategy allows maintenance to be performed more efficiently, since more up-to-date data is obtained about how close the product is to failure. See also Look up or in Wiktionary, the free dictionary. Repair, in, according to the, in the Medical and Surgical Section 0, root operation Q, means restoring, to the extent possible, a body part to its normal anatomic structure and function. This definition, repair, is used only when the method used to accomplish the repair is not one of the other root operations. Examples would be takedown, of a, and the of a.
References. Retrieved 5 August 2016. Retrieved 5 August 2016. All actions which have the objective of retaining or restoring an item in or to a state in which it can perform its required function. The actions include the combination of all technical and corresponding administrative, managerial, and supervision actions.
Berendsen, A. M.; Springer (2013). Marine Painting Manual (1st ed.). ^.
^ and from and from the. 'AAP-6 - Glossary of terms and definitions'. NATO Standardization Agency.: 158. 247 Electrical Services Leeds.
Retrieved 2017-01-26. United States Code of Federal Regulations Title 14, Part 43 - Maintenance, Preventive Maintenance, Rebuilding, and Alteration.
(3 ed.). Montreal (Canada):. The Airworthiness Manual (Doc 9760) contains a consolidation of airworthiness-related information previously found in other ICAO documents. Provides guidance to States on how to meet their airworthiness responsibilities under the Convention on International Civil Aviation.
This third edition is presented based on States' roles and responsibilities, thus as State of Registry, State of the Operator, State of Design and State of Manufacture. It also describes the interface between different States and their related responsibilities.
It has been updated to incorporate changes to Annex 8 to the Chicago Convention — Airworthiness of Aircraft, and to Annex 6 — Operation of Aircraft. ^ Garcia, Mari Cruz; Sanz-Bobi, Miguel A.; Del Pico, Javier (August 2006), Computers in Industry, 57 (6): 552–568,:. Horie, Charles Velson (2010). Materials for Conservation: Organic Consolidants, Adhesives and Coatings (2nd ed.). Retrieved 5 August 2016.
Lr Mate 200id Mechanical Unit Maintenance Manual
Industrial Polymer Applications: Essential Chemistry and Technology (1st ed.). United Kingdom: Royal Society of Chemistry. Kaiser, Kevin A.; Gebraeel, Nagi Z. (12 May 2009), IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans, IEEE, 39 (4): 840–849,.